To Next Page

To Previous Page

Changed Parameters Mode

Figure 12: Changing in the Parameters Mode

Fault Logger Mode

Use the Fault Logger Mode to see drive fault history, fault state

details and help for the faults.

1. Select FAULT LOGGER in the Main Menu.

2. Press ENTER to see the latest faults (up to 10 faults,

maximum).

3. Press DETAIL to see details for the selected fault.

— Details are available for the three latest faults.

4. Press DIAG to see the help description for the fault. See

“Fault Tracing”, page 90.

NOTE: If a power off occurs, only the three latest faults will

remain (with details only in the rst fault).

To view (and edit) a listing of all parameters that have been changed from macro default values, follow these steps:

Select MENU to enter the main menu.

Select CHANGED PAR with the UP/DOWN buttons and select ENTER.

A list of changed parameters is displayed.

Select EXIT to exit the parameters mode.

To complete the control connections by manually entering the parameters, see Parameters Mode, page 15.

For detailed hardware description, see the “Technical Data” starting on page 102 .

sTarT up

Daikin ACS320 User Manual

Questions and Answers: