Daikin ACS320 User Manual

Statement
This statement is part of this Standard and is required for its use.
Table 66: BACnet Protocol Implementation Conformance Statement
Date TBD
Vendor Name Daikin
Product Name Low Voltage AC Motor Drive
Product Model Number MD4
Applications Software Version TBD
Firmware Revision TBD
BACnet Protocol Revision 2
Product Description
The MD4 is a high-performance adjustable frequency drive specically
designed for commercial automation applications. This product supports native
BACnet, connecting directly to the MS/TP LAN. All standard MS/TP baud rates
are supported, as well as master mode functionality. Over BACnet, the drive
can be fully controlled as a standard adjustable frequency drive. In addition, up
to 16 congurable I/O ports are available over BACnet for user applications.
BACnet Standardized Device Prole (Annex L)
□
BACnet Operator Workstation (B-OWS)
□
BACnet Building Controller (B-BC)
□
BACnet Advanced Application Controller (B-AAC)
□
BACnet Application Specic Controller (B-ASC)
□
BACnet Smart Sensor (B-SS)
□
BACnet Smart Actuator (B-SA)
List all BACnet Interoperability Building Blocks Supported
(Annex K)
DS-RP-B, DS-WP-B, DM-DDB-B, DM-DOB-B, DMDCC-B, DM-RD-B.
Segmentation Capability
□
Segmented requests supported. Window Size ____
□
Segmented responses supported. Window Size ____
Standard Object Types Supported
An object type is supported if it may be present in the device. For each standard
Object Type supported provide the following data:
1. Whether objects of this type are dynamically creatable using the CreateObject
service
2. Whether objects of this type are dynamically detectable using the DeleteObject
service
3. List of the optional properties supported
4. List of all properties that are writable where not otherwise required by this standard
5. List of proprietary properties and for each its property identier, datatype, and
meaning
6. List of any property range restrictions
See table at Object/Property Support Matrix on page 89
Data Link Layer Options
□
BACnet IP, (Annex J)
□
BACnet IP, (Annex J), Foreign Device
□
ISO 8802-3, Ethernet (Clause 7)
□
ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
□
ANSI/ATA 878.1, EIA-485 ARCNET (Clause 8), baud rate(s) ___

MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400, 76800
□
MS/TP slave (Clause 9), baud rate(s): ___
□
Point-To-Point, EIA 232 (Clause 10), baud rate(s): ___
□
Point-To-Point, modem, (Clause 10), baud rate(s): ___
□
LonTalk, (Clause 11), medium: __________
□
Other: __________
Device Address Binding
Is static device binding supported?
(This is currently necessary for two-way communication with MS/TP slaves and
certain other devices.)
□
Yes
□
No
Networking Options
□
Router, Clause 6 - List all routing congurations, e.g., ARCNET-Ethernet,
Ethernet-MS/TP, etc.
□
Annex H, BACnet Tunneling Router over IP
□
BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices?
□
Yes
□
No
Character Sets Supported
Indicating support for multiple character sets does not imply that they can all be
supported simultaneously.
□
ANSI X3.4
□
IBM
™
/Microsoft
™
DBCS
□
ISO 8859-1
□
ISO 10646 (UCS-2)
□
ISO 10646 (UCS-4)
□
JIS C 6226
If this product is a communication gateway, describe the types of non- BACnet
equipment/network(s) that the gateway supports:
OM 1190-1 • MD4 VFD 88 www.DaikinApplied.com
fIeldbus ConTrols

Daikin ACS320 Specifications

General

Brand	Daikin
Model	ACS320
Category	Controller
Language	English