6 | Operation
User reference guide
28
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625990-1D – 2022.09
6.8 Powerful and Heat plus operation
6.8.1 Powerful operation
This operation quickly maximizes the cooling/heating effect in any operation mode.
You can get the maximum capacity.
Mode Airflow rate
Cooling/Heating ▪ To maximize the cooling/heating
effect, the capacity of outdoor unit is
increased.
▪ The airflow rate is fixed to the
maximum setting.
▪ The temperature and airflow settings
CANNOT be changed.
Drying ▪ The temperature setting is lowered by
2.5°C.
▪ The airflow rate is slightly increased.
Fan only The airflow rate is fixed to the
maximum setting.
INFORMATION
▪ Powerful operation cannot be used together with Heat plus, Floor warming,
Econo and Outdoor unit quiet operation. The last selected function takes priority.
▪ Powerful operation will NOT increase the capacity of the unit if it already
operates at maximum capacity.
6.8.2 Heat plus operation
This operation increases the airflow temperature coming from the unit. The airflow
temperature is higher than during the normal heating operation. Use this
operation when you want to feel more warmth. This operation has a 30 minute
duration.
INFORMATION
▪ Heat plus operation can be used in heating operation mode only.
▪ If the room temperature is low, the room may not get warm enough.
▪ Do NOT stay close to the air outlet in the direct path of discharged air for a long
time.
▪ After the HEAT PLUS operation ends, depending on the temperature set for HEAT
operation, the power may be temporarily reduced.
▪ In Multi system connection, the airflow temperature may be insufficient.
6.8.3 To start/stop Powerful and Heat plus operation
1 Press one or more times to select operation.
Result: The setting will change as follows.
To Next Page
Loading...
Need help?
General
