6 | Operation
User reference guide
29
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625990-1D – 2022.09
Display Operation
Powerful
Heat plus
— Both deactivated
▪ Powerful operation runs for 20 minutes; after that, operation returns to the
previously set mode.
▪ Heat plus operation runs for 30 minutes; after that, operation returns to the
previously set mode.
2 To stop operation, press until both symbols disappear from the LCD.
Note: Powerful operation and Heat plus can be set only when the unit is running.
If you press , operation will be cancelled; and disappear from the LCD.
6.9 Econo and Outdoor unit quiet operation
6.9.1 Econo operation
This is a function which enables efficient operation by limiting the maximum power
consumption value. This function is useful for cases in which attention should be
paid to ensure a circuit breaker will not trip when the product runs alongside other
appliances.
INFORMATION
▪ Powerful, Heat plus, Floor warming and Econo operation CANNOT be used at the
same time. The last selected function takes priority.
▪ Econo operation is only available in automatic, cooling, heating and drying
operation modes.
▪ Econo operation reduces power consumption of the outdoor unit by limiting the
rotation speed of the compressor. If power consumption is already low, Econo
operation will NOT further reduce power consumption.
A Running current and power consumption
B Time
a Maximum during normal operation
b Maximum during Econo operation
c Normal operation
d Econo operation
▪ The diagram is for illustrative purposes only.
▪ The maximum running current and power consumption of the air conditioner in
Econo operation varies with the connected outdoor unit.
To Next Page
Loading...
Need help?
General
