To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Daikin IM 986-2 VHC and is the answer not in the manual?
General| Model Number | IM 986-2 VHC |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 9.8 kW |
| Cooling Capacity | 8.6 kW |
| Refrigerant | R410A |
Procedures for handling and stacking cabinet skids during transport and storage.
Procedures for handling and stacking chassis skids during transport and storage.
Recommended environmental conditions for unit storage and operation.
Guidelines for safely handling the unit and its components during installation.
Overview of design, application, and installation standards for the units.
Step-by-step guide to disassemble the unit cabinet into upper and lower sections.
Tips for minimizing noise and vibration for optimal unit performance.
Specific dimensions for the return air grille/panel installation and fit-up.
Steps for positioning and securing the unit cabinet and connecting risers.
Procedure for cleaning and flushing the water system before unit operation.
Instructions for connecting the unit's power supply wiring from the building.
Steps for connecting the condensate drain hose to the unit's drain stub out.
Guidelines for making water piping connections and installing valves.
How to make flexible hose connections to supply and return valves from riser stub-outs.
Steps for installing the unit chassis into the cabinet.
Procedure for connecting wiring between the cabinet and chassis components.
Instructions for installing the optional Remote Control Node (RCN).
Steps for installing the return air grille/panel assembly.
Instructions for installing the discharge air diffuser.
Overview of controller features, LED indicators, and fault output sequences.
Explanation of the remote reset feature for automatic lockouts.
Detailed descriptions of terminal locations and their functions on the unit controller.
How to manually operate the unit in cooling or heating modes.
Overview of available thermostats and wall sensors for unit control.
Description of the Remote Control Node (RCN) for wireless control.
Details on the motorized isolation valve kit and its wiring.
Properties, lubrication, charging, and safety of R-410A refrigerant.
Routine maintenance tasks including filter changes and system checks.
