1-2
1.1 Main Specifications
Item Main Specifications
Mode Switch
Chilled mode +30.0℃ 〜 -9.9℃ (+86.0F 〜 -14.1F)
Frozen mode -10.0℃ 〜 -30.0℃ (+14.0F 〜 -22.0F)
Condenser cooling system Air cooling type
Controller DECOSVa
Power source
Three phase 50Hz : 380/400/415V、60Hz : 440/460V
Voltage fluctuation rate should be within ±10%.
Inverter compressor Hermetically sealed scroll type (MAX. motor output : 8.1 kW)
Evaporator Cross-fin coil type
Air cooling condenser Cross-fin coil type
Evaporator fan Propeller fan
Evaporator fan motor
Squirrel-cage three phase induction motor (Motor output:
400W/60W), dual speed, 2P/4P
Condenser fan Propeller fan
Condenser fan motor
Squirrel-cage three phase induction motor (Motor output:
670W/120W), dual speed, 4P/6P
Defrosting system Hot-gas defrosting system
Refrigerant control Electronic expansion valve
Capacity control By inverter compressor and hot-gas control
Refrigerant R134a (For refrigerant charging amount, refer to the name plate)
Refrigerant oil IDEMITSU, Daphne hermetic oil FVC68D
Weight For detail, refer to the name plate, unit performance
●The resistance of solenoid coil
Component name Coil Resistance
Compressor motor 0.90Ω±7% (20℃ )
Condenser fan motor High speed: 30.6Ω±5% (20℃ ) / Low speed: 21.6Ω±5% (20℃ )
Evaporator fan motor
High speed: 23.0Ω±10% (20℃ ) / Low speed: 89.2Ω±10% (20℃ )
Solenoid valve LSV, ESV, HSV, RSV 15.2 Ω±10% (20℃ )
Modulation valve EEV, EMV, DMV 46±3Ω/phase （20℃）
0101-22LX10F11BEn.indd1-20101-22LX10F11BEn.indd1-2 2014/11/1916:40:182014/11/1916:40:18
To Next Page
Loading...
Need help?
General
