SiBE121021_C SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
Operation Manual 237
English 19
Operation Contents
Program Dry
Program Dry Operation
Home Leave
Note
Operation Method
The home leave can not be enabled when a centralized control is connected.
1
ON Home leave is enabled
FLASHING Home leave is active
OFF Home leave is disabled
The Program dry function of the system repeats the weak cooling
operation of the system intermittently to dehumidify the room without
dropping the room temperature as much as possible for the
prevention of excessive cooling.
Home Leave is a feature that enables to keep the room temperature above 10°C when the
occupants are out.
The Home Leave icon shows the status
of the home leave function.
• The microcomputer is in automatic temperature and fan speed control. Therefore, temperature or
fan speed settings cannot be made or changed while the air conditioner is in operation.
• This function will switch on heating if the installation is switched off.
• For the setting, please contact your local dealer.
• Press and hold the “ ” or “ ” button
for at least four seconds. (During
backlight lit)
• The Home Leave icon displays and
function is enabled.
•
To cancel the home leave mode, continue
pressing Menu/Enter button for at least
four seconds. (During backlight lit)
To Next Page
Loading...
Need help?
General
