Danfoss AK-CC55 User Manual

Defrost schedules
Table 34: Defrost schedules
Function
Description
Values
Code
Short name
Defrost schedule
0=No, 1=Yes
t00
t00 Def.Schedule
Def. start 1 - Hours
Time in hours for start of defrost
t01
t01 Def. 1 hr.
Def. start 1 - Minutes
Time in minutes for when defrost cycle is to be star-
ted
t11
t11 Def. 1 min.
Def. start 2 - Hours
Time in hours for start of defrost
t02
t02 Def. 2 hr.
Def. start 2 - Minutes
Time in minutes for when defrost cycle is to be star-
ted
t12
t12 Def. 2 min.
Def. start 3 - Hours
Time in hours for start of defrost
t03
t03 Def. 3 hr.
Def. start 3 - Minutes
Time in minutes for when defrost cycle is to be star-
ted
t13
t13 Def. 3 min.
Def. start 4 - Hours
Time in hours for start of defrost
t04
t04 Def. 4 hr.
Def. start 4 - Minutes
Time in minutes for when defrost cycle is to be star-
ted
t14
t14 Def. 4 min.
Def. start 5 - Hours
Time in hours for start of defrost
t05
t05 Def. 5 hr.
Def. start 5 - Minutes
Time in minutes for when defrost cycle is to be star-
ted
t15
t15 Def. 5 min.
Def. start 6 - Hours
Time in hours for start of defrost
t06
t06 Def. 6 hr.
Def. start 6 - Minutes
Time in minutes for when defrost cycle is to be star-
ted
t16
t16 Def. 6 min.
Monday - Follow
schedule
0=No, 1=Yes
t51
t51 Mon.Schedule
Tuesday - Follow
schedule
0=No, 1=Yes
t52
t52 Tue.Schedule
Wednesday - Follow
schedule
0=No, 1=Yes
t53
t53 Wed.Schedule
Thursday - Follow
schedule
0=No, 1=Yes
t54
t54 Thu.Schedule
Friday - Follow
schedule
0=No, 1=Yes
t55
t55 Fri.Schedule
Saturday - Follow
schedule
0=No, 1=Yes
t56
t56 Sat.Schedule
Sunday - Follow
schedule
0=No, 1=Yes
t57
t57 Sun.Schedule
Compressor
Table 35: Compressor
Function
Description
Values
Code
Short name
Compressor 1
Actual status of output function
0=OFF, 1=ON
u58
u58 Comp1/LLSV
Compressor 2
Actual status of output function
0=OFF, 1=ON
u67
u67 Comp2 relay
Min ON time
Minimum time the compressor is to run once it has
been started.
c01
c01 Min. On time
Min OFF time
Minimum time the compressor has to be stopped
c02
c02
Min.O time
Step control mode
Selection of step control mode for compressors. At
sequential mode compressor 1 will always be the rst
to start and the last to stop. In cyclic mode the run
time between the compressor will be equalized.
1=Sequential, 2=Cyclic
c08
c08 Step mode
Delay between
comp.
Time delay for couplings of two compressors. The
step delay is the time that has to elapse from the rst
compressor cuts in and until the next compressor can
cut in.
c05
c05 Step delay
AK-CC55 Single Coil and Single Coil UI
© Danfoss | Climate Solutions | 2021.02 BC364229688105en-000101 | 56

Danfoss AK-CC55 Specifications

General

Brand	Danfoss
Model	AK-CC55
Category	Controller
Language	English