Danfoss ECL 2000 Installation Guide

Mounting
EI.65.D4.02
6
Figure 5. Mounting the controller in the case
6. Secure the controller with the fixing screw (see Figure 6).
Figure 6. Wall mounting
3.1.1 Removal From the Case
To remove the controller from the case:
1. Remove the fixing screw (see Figure 6).
2. Hold the controller by the edge of the front panel and carefully work the
controller backwards and forwards to loosen the connectors on the con-
troller’s rear side from the terminal blocks.
Quick Guide

Danfoss ECL 2000 Specifications

General

Brand	Danfoss
Model	ECL 2000
Category	Temperature Controller
Language	English