Desired room
temp. in setback
mode
Select the constant comfort mode.
Set the desired room temperature for the comfort
mode.
Select the constant setback mode.
Set the desired room temperature for the setback
mode.
Select the desired mode (section 2).
The setting of the desired room temperature is important even if
a room temperature sensor /room panel / remote control is not
connected.
Is the room temperature too low?
Make sure that the radiator thermostat does not limit the room
temperature.
If you still cannot obtain the desired room temperature by
adjusting the radiator thermostats, the flow temperature is too
low. Increase the desired room temperature.
Circuit II:
Setting the desired DHW charging temperature
Desired DHW
charging temp. in
setback mode
Select the constant comfort mode.
Set the desired DHW charging temperature for
the comfort mode.
Select the constant setback mode.
Set the desired DHW charging temperature for
the setback mode.
Select the desired mode (section 2).
To Next Page
Loading...
Need help?
General
