Danfoss VLT AutomationDrive FC 300 Series Design Guide

FC 300 Design Guide
Introduction to FC 300
Use Case 2: Positive Reference with Dead band, Digital input to trigger reverse. Clamping rules.
This Use Case shows how Reference input with lim its outside -Max - + Max limits clamps to
the inputs low and high limits before addition to External reference. And how the External
reference is clamped to -Max - +Max by the Reference algorithm.
29
MG.33.B3.22 - VLT is a registered Danfoss trademark

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English