To Next Page

To Previous Page

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 17

Chapter 3: Installing the

Smart Card Driver

Thischaptercontainsinstructionsforinstallingasmartcarddriveronto

thePC.FollowoneoftheproceduresinthischapterifyourSR200or

SR300cardprintercontainsanoptionalsmartcardreaderupgrade.

YourSR200orSR300cardprintermaycontainoneofthesesmartcardreaderupgradeoptions:

 Gemalto®Contactless

 Duali®ContactlessorContact/Contactless

 Identive®DualContact/Contactless

 iCLASS®/pcProx®

Downloading and Installing the Gemalto

Contactless Driver

UsethisprocedureifyourSR200orSR300cardprinterhastheoptionalGemaltocontactless

smartcardreaderinstalled.

1. Downloadthedriver.

a. Usingyourwebbrowser,gotohttp://support.gemalto.com.

b. ClickDownloadreaderdrivers.

c. SelectPC‐LinkReaders>IDBridgeCT30(PC‐USBTRandPCTWIN).

d. Fromthelist,select

youroperatingsystem,language,andarchitecture(32‐bitor64‐bit).

Also,selectdriversforaUSBconnection,notaserialconnection.

Forexample,forEnglish‐languageWindowsVista32‐bit,USBconnection,selectthe

following:

Caution:Wheninstallingaprintercontainingasmartcardreader,useoneofthe

followingprocedurestoinstalltheappropriatesmartcarddriverbeforeinstallingthe

printerdriverinChapter4.

Driver installation may vary with operating system and other computer variables.

DataCard LM200 Installation Guide

Other manuals for DataCard LM200