DataCard LM200 Installation Guide

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 55
Chapter 5: Installing the
Status Monitor
ThischaptercontainstheprocedureforinstallingtheStatusMonitoron
eachPCthatisconnectedtothecardprinter.Instructionsarealso
includedforsettingtheprinterunitnumber,name,andconnectiontype
(networkorUSB).
Installing the Status Monitor
TheStatusMonitorisanapplicationthatrunsonthePCandcommunicateswiththecardprinter.
Itdisplaysinformationabouttheprinterandallowsuserstoviewandchangemostprinter
settings.
InstalltheStatusMonitoroneachPCusedtoprintcards(USBornetwork‐connected).
1. StartyourPC’sWindowsoperatingsystemandlogonasauserwithadministrator‐level
permissions.
2. InserttheInstallationCDshippedwithyourprinterinthePCdrive.
3. Whentheopeningwindowisdisplayed,clickInstallthePrinter.
4. ClickInstalltheDriver.
5. IftheUserAccountControldialogdisplays,clickAllow.
The“WelcometoSRCardPrinter”dialogboxdisplays.
If you are installing the Status Monitor as soon as the driver is installed, begin at step 6, with
the “Welcome to SR Card Printer” dialog box open.

DataCard LM200 Specifications

General

Brand	DataCard
Model	LM200
Category	Laminator
Language	English