DataCard LM200 Installation Guide

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 59
Setting the Unit Number, Printer Name, and
Connection
IfyouinstallmorethanoneSR200orSR300printeronaPC,eachprintermusthaveadifferent
unitnumberandadifferentprintername.Eachunitnumberandprinternamemustcorre spond
toeachother.Forexample,ifunitnumberis3theprinternamemustbePRINTER03.
If
youinstallaprinterov erthenetwork,thedefaultinterfacemustbesettoNetwork.Ifyou
installtheprinterusingaUSBcable,thedefaultinterfacemustbesettoUSB.
TipsforSuccess
 Forbestresults,planprinterdeploymentandnumbering.Installtheprintertowhichyouwill
assignthehighestnumberfirst.Theninstallthenextlowernumber,endingwiththeprinter
namedPRINTER01andhavingunitnumber1.
 IfmorethanprinteristobeinstalledonthePC,settheunitnumberandprinternamebefore
installingtheprinter.
 WheninstallingtheprinterusingaUSBconnection,selecttheportnametocorrespondto
theunitnumberandprintername.Forexample,iftheprinternameisPRINTER03andthe
unitnumberis3,selectportSRU3.
 Ifanetwork‐connectedprinterwillbeinstalledonseveralPCs,eachPCmustusetheunit
numberandprinternameassignedintheprinter.
 IftheprinterwaspreviouslyusedasanetworkprinterandyouwanttouseaUSBconnection,
thedefaultinterfacemustbesetbacktoUSB.
1. Installprintersupplies.Referto“UsingthePrinterandLaminator”in theUser’sGuideto
installinkribbonandretransferfilmcartridges.
2. Installthe
StatusMonitorfromtheInstallationCD .Referto
“InstallingtheStatusMonitor”onpage 55.Closethe
installationwindows.
3. WiththeInstallationCDinthePCdrive,connecttheprinter
andPCusingaUSBcable.DonotclicktheInstallthePrinter
button.
4. Powerontheprinter.ThePCdetects
theUSBhub,anddisplays
aFoundNewHardwarewizard.Followthepromptstoinstall
thehubsoftware.ThePCpostsanidentifier,suchasSR‐CPU1.
Recordthisidentifiertouseinstep 7.

DataCard LM200 Specifications

General

Brand	DataCard
Model	LM200
Category	Laminator
Language	English