EasyManuals Logo
Home>DataCard>Printer>SD460

DataCard SD460 Installation And Administrator's Guide

DataCard SD460
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
SD260L/SD360/SD460 Installation and Administrator’s Guide 93
The following laminator supplies are available. Most are available for a full card, smart card, or
magnetic stripe card. Contact your dealer for a complete list of laminator supplies.
Patch:
 Clear DuraGard®, 0.5 mil, up to 350 images/roll
 Clear DuraGard, 1.0 mil, up to 300 images/roll
 Holographic DuraGard 0.6 mil, Random, up to 350 images/roll
 Holographic DuraGard, Registered, 0.6 mil, up to 350 images/roll
 Holographic DuraGard, 1.0 mil, Random, up to 300 images/roll
 Holographic DuraGard Registered, 1.0 mil, up to 300 images/roll
Topcoat:
 Clear, number of images depends on lamination settings
 Holographic, Random, number of images depends on lamination settings
 Registered Holographic, up to 600 images/roll
 Clear DuraShield™, number of images depends on lamination settings (see note)
 Holographic DuraShield, Random, number of images depends on lamination settings (see
note)
 Holographic DuraShield, Registered, 500 images/roll (see note)
Caution: DuraGard patch overlay cannot be applied over a “T” panel topcoat applied
from a ribbon. Make sure that the DuraGard patch is applied to the card side without
a “T” panel topcoat.
DuraShield clear and holographic overlays must be used with a ribbon that includes
an inline topcoat (T) panel, for example, KT, YMCKT, YMCKT-K, YMCKT-KT, ymcKT, or
YMCKF-KT. It must be applied over the topcoat.

Table of Contents

Other manuals for DataCard SD460

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard SD460 and is the answer not in the manual?

DataCard SD460 Specifications

General IconGeneral
ColorYes
Card size85.6 x 53.98 mm
Card typesMagnetic stripe (ISO 7811), PVC, Smart card
Print technologyDye-sublimation/Resin Thermal transfer
Duplex print speed (color)200 card/h
DisplayLCD
CertificationcULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product colorBlack, Blue
Internal memory128 MB
Built-in barcodes1D, 2D
Total input capacity100 sheets
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Wi-FiNo
USB version2.0
Ethernet interface typeFast Ethernet
Storage temperature (T-T)-15 - 60 °C
Operating temperature (T-T)15 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Weight13600 g
Dimensions (WxDxH)589 x 270 x 513 mm

Related product manuals