DataCard SD460 Installation And Administrator's Guide

A-16 SD460 Laminating System
b. Select the print and lamination options you want to test, and then click Run to print a
test card. You also can select to debow the test card, and impress the card if an impresser
is installed.
Verify the Test Card
Examine the test cards to verify the following.
 The overlays are being applied properly:
 Each overlay is applied completely to the card.
 The material adheres well to the edges of the card.
 The overlay does not come off when the card is bent or twisted.
 The card is debowed correctly.
 The impression is positioned correctly and has the proper depth.
If you need to adjust the laminator settings, refer to the following Printer Manager sections:
“Laminator” on page 66 and “LaminateType” on page 73.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm