DataCard SD460 Installation And Administrator's Guide

98 Supplies and Parts
Replacement Parts
The following replacement parts are available.
Printhead Cartridge
The printer has a replaceable printhead cartridge. The printhead is
subject to wear or damage and has a direct impact on print quality.
Do not touch the printing edge of the printhead in the printhead
cartridge. Clean the printhead following the steps in your printer’s
User’s Guide.
Print Ribbon Cartridge
The ribbon cartridge holds the print ribbon and the replaceable
cleaning sleeve in the printer.
Cleaning Roller Spindle
The cleaning roller spindle holds the replaceable cleaning sleeve.
Laminator Cartridges
The L1 (green) and L2 (orange) cartridges hold the
laminator overlay material. They are used in the SD460
system only.
Impresser Die
Contact Entrust Datacard to special order a new die for your impresser. The
die must be installed by an authorized Entrust Datacard service provider.
The die is available for the SD460 system only.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm