EasyManuals Logo
Home>DataCard>Printer>SD460

DataCard SD460 Installation And Administrator's Guide

DataCard SD460
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
30 Elements of Card Design
Backgrounds
Use the following suggestions to help you select a background for a professional-looking card. For
best results, make sure that the background design does not emphasize the location of card
features, such as embedded electronics.
 Consider using a white background for the card to achieve consistent professional results.
 Consider using smaller blocks of color, patterned areas, or gradients to highlight printed card
features such as a name, photo, or logo.
 Avoid using a solid-color background over a large area of the card. It can show flaws on the
card (such as an uneven surface) or the location of card features (such as a smart card chip).
Image Placement
Use the following suggestions to help you locate important
images, such as a photo, logo, or bar code. When placing images,
avoid uneven areas and areas of high wear, which can result in
inconsistent print quality.
 Do not place an important image on the front of the card in
the same area as a magnetic stripe or other machine-
readable feature. Frequent use of a card in a reader can wear
away the image on the opposite side of the card.
 Do not place an important image directly on the opposite side of a signature panel. This can
cause residue from the signature panel to interfere with printing on an adjacent card. Place
the image above, below, or to the side of the panel.
 Do not place an important image directly on the opposite side of a smart card chip. The card
might not be as flat in that area, and printing voids may occur.
Photo
Better
Photo
Location
Front of Card

Table of Contents

Other manuals for DataCard SD460

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard SD460 and is the answer not in the manual?

DataCard SD460 Specifications

General IconGeneral
ColorYes
Card size85.6 x 53.98 mm
Card typesMagnetic stripe (ISO 7811), PVC, Smart card
Print technologyDye-sublimation/Resin Thermal transfer
Duplex print speed (color)200 card/h
DisplayLCD
CertificationcULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product colorBlack, Blue
Internal memory128 MB
Built-in barcodes1D, 2D
Total input capacity100 sheets
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Wi-FiNo
USB version2.0
Ethernet interface typeFast Ethernet
Storage temperature (T-T)-15 - 60 °C
Operating temperature (T-T)15 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Weight13600 g
Dimensions (WxDxH)589 x 270 x 513 mm

Related product manuals