DataCard SD460 Installation And Administrator's Guide

92 Supplies and Parts
Laminator Supplies
The laminator applies topcoat or patch overlay material to the front and back of the card. Topcoat
is a continuous film and patch is a die-cut polyester shape designed to fit standard ISO ID-1 size
card stock.
Topcoat and Patch Overlays
A patch overlay can cover the complete card, can have a opening for a smart card chip, or can
cover the card under the magnetic stripe.
Both topcoat and patch overlays can be clear or can have a transparent holographic image on
them. The holographic materials are called holographic topcoat or holographic patch and also
can be ordered with a custom image. In addition, holographic topcoat or patch can be designed
with a registered image that is located in the same position on each card.
Complete Card Smart Card
Magnetic Stripe
Clear Topcoat
Clear Patch
Random Holographic Patch
Random Holographic Topcoat
Registered Holographic Topcoat
Registered Holographic Patch

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm