DataCard SD460 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 69
 ExceptionCardDebowDwellMs—Set the time, in milliseconds, the debow action is applied to
a card. The default is 2000 ms (2 seconds).
 Increase the value to apply the debow action longer.
 Decrease the value to apply the debow action for less time.
Exception Card Impresser Settings:
 ExceptionCardImpressDepth—Set the depth of the impression on a card. The value is in
steps of the impresser punch.
 Increase the value to deepen the impression.
 Decrease the value to lessen the impression.
 ExceptionCardImpressDwellTime—Set the time, in milliseconds, that the impresser remains
in contact with the card. The default is 2000 ms (2 seconds).
 Increase the value to allow the impresser to remain on the card longer.
 Decrease the value to impress the card for a shorter time.
 ExceptionCardImpressPositionOffset1—Set the distance from the trailing edge of the card to
the center of the first impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
 ExceptionCardImpressPositionOffset2—Set the distance from the trailing edge of the card to
the center of the second impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
 ExceptionCardImpressPositionOffset3—Set the distance from the trailing edge of the card to
the center of the third impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
You may need to adjust the card impress depth value based on the card material
and overlay type used.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm