DataCard SD460 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 65
Change settings as needed, and then click Set Current to apply changes.
 CustomCharHigh—Specify the numeric value of the highest ASCII character supported for
input data on the track.
 CustomCharLength—Set the number of bits to represent one character of data on the track,
also called bits per character.
 CustomCharLow—Specify the numeric value of the lowest ASCII character supported for
input data on the track.
 CustomCharMask—Specify the mask value that is subtracted from the ASCII numeric value to
get the encoded value.
 CustomCharMax—Specify the maximum number of data characters for the track. The value
does not include the start sentinel or end sentinel.
 CustomDensity—Specify the number of data bits per inch of magnetic stripe media for the
track, also called bits per inch or bpi. Allowed values are 75 bpi or 210 bpi.
 CustomEndSentinel—Specify the last character encoded, which identifies the end of
encoded data for the track.
 CustomLrc—Specify a cumulative parity bit that is encoded after the end sentinel to provide
simple error checking.
 CustomParity—Specify a character-level parity bit encoded after each character to provide
simple error checking.
 CustomSdsNulls—The number of nulls between each copy of the data record. You should not
change this value.
 CustomSdsRecords—The number of times to encode the data record. You should not change
this value.
 CustomSdsSs—The number of start sentinels before each data record. You should not change
this value.
 CustomStartSentinel—Specify the first character encoded, which identifies the start of the
encoded data for the track.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm