ADVANCED FORMATTING
116
A
DVANCED
F
ORMATTING
Advanced formatting has been designed to offer you complete flexibility in changing the format
of barcode data before
transmitting it to the host system. This formatting will be performed
when the barcode data meets certain criteria which you will define in the following procedure.
Up to 4 advanced code management formats can be defined and saved in memory. For each
format you must complete the entire configuration procedure:
Define another?
Enable Advanced Formats
1, 2, 3, 4
Define No Match Result
Read the
Exit and Save
Configuration
Command
Step 5
Divide Code into Fields
Steps 7 - 8
Add up to 2 Additional Fields
Step 1
Begin Format Definition
1, 2, 3, or 4
Step 6
Define Code Fields
Steps 2 - 4
Define Match Code Conditions
Step 9
Define Field Transmission
Step 10
Apply or Not
Standard Message Formatting
Read the
Enter
Configuration
Command
Step 11
End Format Definition
1, 2, 3, or 4
YES
NO
To Next Page
Loading...
Need help?
General
