Datalogic QuickScan QBT2500 User Manual

ENTER/EXIT PROGRAMMING MODE WIRELESS FEATURES
242 QUICKSCAN™ 2500
Erase Batch Memory
When the reader is configured in Manual Batch Mode, use the following bar code to
erase any labels stored in batch memory.
Erase Batch Memory
BatchClear
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in batch
memory.
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
$CBTTD00

RF Batch Mode Transmit Delay = No Delay
RF Batch Mode Transmit Delay = 50 msec
$CBTTD05
$CBTTD0A
RF Batch Mode Transmit Delay =100 msec
RF Batch Mode Transmit Delay = 0.5 seconds
$CBTTD32
$CBTTD64
RF Batch Mode Transmit Delay = 1 second
RF Batch Mode Transmit Delay = 2.5 seconds
$CBTTDFA

Datalogic QuickScan QBT2500 Specifications

General

Brand	Datalogic
Model	QuickScan QBT2500
Category	Barcode Reader
Language	English