CUSTOMIZING CONFIGURATION SETTINGS
PRODUCT REFERENCE GUIDE
25
Datalogic Aladdin™ Utility
Programming can alternatively be performed using the Datalogic Aladdin™ Configura-
tion application which is available for free download from the Datalogic website listed
on the back cover of this manual. This multi-platform utility program allows device con-
figuration using a PC. It communicates to the device using a serial or USB cable and can
also create configuration bar codes to print.
Datalogic Aladdin™ is a multi-platform utility program providing a quick and user-
friendly configuration method via the RS-232/USB-COM interface. The Aladdin utility is
available on the Datalogic website. Aladdin allows you to program the reader by select-
ing configuration commands through a user-friendly graphical interface running on a
PC. These commands are sent to the reader over the selected communication interface,
or they can be printed as bar codes to be scanned.
Aladdin also provides the ability to perform a software upgrade for the connected
device (see the Datalogic Aladdin™ Help On-Line for more details).
Interface Settings
The reader is typically factory-configured with a set of default features standard to the
interface type you ordered. See
Appendix B, Standard Defaults.
Global Interface Features, starting on
page 27 provides settings configurable by all inter-
face types. If your installation requires you to further customize your reader, you can
select other options through use of the instructions and programming bar codes avail-
able in the appropriate section for your interface.
• "
Not available for QW2500 and QD2520" on page 30
• "RS-232/USB-COM Interfaces" on page 35
• RS232 OPOS on page 23
• USB Composite (COM + Keyboard) on page 24
• KEYBOARD INTERFACE on page 43
• USB-OEM INTERFACE on page 72
Configuring Other Features
If your installation requires different programming than the standard factory default
settings, the following sections of this manual allow configuration of non-interface-spe-
cific settings you might require:
Configuration Using Bar Codes:
General Features includes programming for scanning,
beeper and LED indicators and other such universal settings.
Reading Parameters:
Reading Parameters include programming for scanning, beeper
and LED indicators and other universal settings.
1D Symbologies:
Includes options concerning the bar code label types (symbologies).
These settings allow you to enable/disable symbologies, set label lengths, require check
digit, etc.
To Next Page
Loading...
Need help?
General
