PRODUCT REFERENCE GUIDE
xi
PREFACE
ABOUT THIS MANUAL
This Product Reference Guide (PRG) is provided for users seeking advanced technical
information, including connection, programming, maintenance and specifications. The
Quick Reference Guide (QRG) and other publications associated with this product are
downloadable free of charge from the website listed on the back cover of this manual.
Typically, units are factory-programmed for the most common terminal and communi-
cations settings. If you need to modify any programmable settings, custom configura-
tion can be accomplished by scanning the programming bar codes within this guide.
Programming can alternatively be performed using the Datalogic Aladdin™ Configura-
tion application, which is available from the Datalogic website listed on the back cover
of this manual. This multi-platform utility program allows device configuration using a
PC. It communicates to the device using a serial or USB cable and can also create config-
uration bar codes to print.
OVERVIEW
Chapter 1, Introduction provides a product overview, and general information about
programming the reader.
Chapter 2, Setup presents information about unpacking and setting up the reader, and
interface configuration bar codes and details.
Chapter 3, Configuration Using Bar Codes provides instructions and bar code labels for
customizing your reader. There are different sections for interface types, general fea-
tures, data formatting, and symbology-specific features.
Chapter 4, References provides details concerning programmable features.
Appendix A, Technical Specifications lists physical and performance characteristics, as
well as environmental specifications. It also provides standard cable pin-outs and
descriptions of the functions and behaviors of the reader’s LED and Beeper indicators.
Appendix B, references common factory default settings for reader features and options.
Appendix C, Sample Bar Codes offers sample bar codes of several common symbologies.
Appendix D, Keypad includes numeric bar codes to be scanned for certain parameter set-
tings.
Appendix E, Scancode Tables lists control character emulation information for Wedge
and USB Keyboard interfaces.
Appendix F, ASCII Chart lists hexadecimal reference values for ASCII characters.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
