EasyManuals Logo
Home>Datalogic>Barcode Reader>QuickScan QD2590

Datalogic QuickScan QD2590 User Manual

Datalogic QuickScan QD2590
303 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
RS-232 STANDARD SETTINGS ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
25
Handshaking Control
The data interface consists of an RS-232 port designed to operate either with or without
the hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). Hand-
shaking Control includes the following options:
RTS — RTS is asserted during transmissions. CTS is ignored.
RTS/CTS — RTS is asserted during transmissions. CTS gates transmissions.
RTS/XON/XOFF — RTS is asserted during transmissions. CTS is ignored. XON and
XOFF gate transmissions.
RTS On/CTS — RTS is always asserted. CTS gates transmissions.
RTS/CTS Scan Control — RTS is asserted during transmissions. CTS gates transmis-
sions and controls enable and disable state of reader.
$CR2HC00
Handshaking Control = RTS
Handshaking Control = RTS/CTS
$CR2HC01
$CR2HC02
Handshaking Control = RTS/XON/XOFF
Handshaking Control = RTS On/CTS
$CR2HC03
$CR2HC04
Handshaking Control = RTS/CTS Scan Control
Handshaking Control = RTS Off
$CR2HC05

Table of Contents

Other manuals for Datalogic QuickScan QD2590

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic QuickScan QD2590 and is the answer not in the manual?

Datalogic QuickScan QD2590 Specifications

General IconGeneral
TypeHandheld bar code reader
Sensor type-
Scanner type1D/2D
Scanner resolution0.17 mm
Tilt reading angle0 - 360 °
Pitch reading angle0 - 65 °
Light levels (direct sunlight)0 - 100000 lx
Linear (1D) barcodes supportedCPC Binary, Codabar, Codabar 125, Code 11, Code 128, Code 128A, Code 128B, Code 128C, Code 25 (IR 2 of 5), Code 25 (non-IR 2 of 5), Code 3 of 9, Code 32, Code 39, Code 93, DUN 14, DataBar14, Discrete 2 of 5, EAN 128, EAN 2, EAN 5, EAN-13, EAN-8, Facing Identification Mark, GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, GS1 Databar Limited, GS1-128 (UCC/EAN-128), HIBC, IATA, ISBN, ISSN, ITF-14, ITF-6, Industrial 2 of 5, Intelligent Mail, Interleaved 2 of 5, JAN, Latent image, MSI, Matrix 2 of 5, PDF417, PLANET, POSTNET, Pharmacode, Plessey, PostBar, RM4SCC / KIX, S-Code, Telepen, Trioptic, U.P.C., UPC-A, UPC-E
Optical sensor resolution (W x H)1280 x 800 pixels
2D (matrix & stacked) barcodes supportedAztec Code, Data Matrix, Dot Code A, MaxiCode, Micro QR Code, QR Code
Cable length2 m
Standard interfacesUSB
Connectivity technologyWired
Product colorBlack
Image formats supportedBMP, JPEG, TIFF
International Protection (IP) codeIP52
Input voltage5 V
Power consumption450 mA
Cables includedUSB Type-C
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Sustainability certificatesRoHS
MaterialPolyvinyl chloride (PVC)
Connector 1USB C
Product typeUSB cable
Connector genderMale/Male
Brand compatibilityDatalogic
Connector 1 form factorStraight
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Depth126 mm
Width148 mm
Height68 mm
Weight145 g

Related product manuals