Dell 5330dn - Workgroup Laser Printer B/W User Manual

forms use inks that are compatible with this fusing temperature (180° C or 356° F for 0.1 second).
Paper Specifications
Category Specifications
Acid Content 5.5 pH or lower
Caliper 0.094-0.18 mm (3.0-7.0 mils)
Curl in Ream Flat within 0.02 in (5 mm)
Cut Edge
Conditions
Cut with sharp blades with no visible fray.
Fusing
Compatibility
Must not scorch, melt, offset, or release hazardous emissions
when heated up to 180° C (356° F) for 0.1 second.
Grain Long Grain
Moisture
Content
4%-6% by weight
Smoothness 100-400 Sheffield
Paper Output Capacity
Output
Location
Capacity
Output tray
(Face Down)
250 sheets of 75 g/m
2
bond (20 lb) paper
Rear door
(Face Up)
100 sheets of 75 g/m
2
bond (20 lb) paper
Printer and Paper Storage Environment
Paper storage environmental conditions directly affect the feed operation.
Ideally, the printer and paper storage environment should be at or near room temperature not too dry or humid.
Remember that paper is hygroscopic: it absorbs and loses moisture rapidly.

Dell 5330dn - Workgroup Laser Printer B/W Specifications

General

Brand	Dell
Model	5330dn - Workgroup Laser Printer B/W
Category	Printer
Language	English