Dell 5330dn - Workgroup Laser Printer B/W User Manual

To change the displayed language that the operator panel displays, follow these steps:
1. Press Menu (
).
2. Press Scroll (
to ) to highlight Settings and press Select ( ).
3. Press Scroll (
to ) to highlight Setup and press Select ( ).
4. Press Scroll (
to ) to highlight Language and press Select ( ).
5. Press Scroll (
to ) to display the language you want.
The available languages are English, Deutsch, Espanol, FRANCAIS, Italiano, and Nederlands.
6. Press Select (
) to save the selection.
7. Press Cancel (
) to return to Standby mode.
Power Save Mode
The Power Save mode allows your printer to reduce power consumption when it is not in actual use. When the printer does not
receive data for an extended period of time, power consumption is automatically lowered. To set how long the printer waits before
going to power save:
1. Press Menu (
).
2. Press Scroll (
to ) to highlight Settings and press Select ( ).
3. Press Scroll (
to ) to highlight Setup and press Select ( ).
4. Press Scroll (
to ) to highlight Power Save and press Select ( ).
5. Press Scroll (
to ) to display the time settings you want.
The available options are 5, 10, 15, 30, 60 and 120(minutes).
6. Press Select (
) to save the selection.
7. Press Cancel (
) to return to Standby mode.
Changing the Font Setting
Your printer has preset the font for your region or country. To change the font or to set the font under special conditions, such as
the DOS:
1. Press Menu (
).
2. Press Scroll (
to ) to highlight Emulation and press Select ( ).
3. Press Scroll (
to ) to highlight Setup and press Select ( ).
4. Press Scroll (
to ) to highlight PCL and press Select ( ).
5. Press Scroll (
to ) to access the required value.
6. Press Select (
) to save the selection.

Dell 5330dn - Workgroup Laser Printer B/W Specifications

General

Brand	Dell
Model	5330dn - Workgroup Laser Printer B/W
Category	Printer
Language	English