You can check the level of toner left in the cartridge.
If you are having print quality problems, this can help you determine if the problem is caused by low toner.
1. Press Menu (
).
2. Press Scroll (
to ) to highlight Maintenance and press Select ( ).
3. Press Scroll (
to ) to highlight Supplies Life and press Select ( ).
4. Press Scroll (
to ) to highlight Toner Remains and press Select ( ).
The display shows the percentage of the remaining toner.
Redistributing Toner
When the toner cartridge is near the end of its life, white streaks or light print occurs. The LCD displays the warning
message, Toner Low. Thoroughly shake the toner cartridge from side-to-side to distribute the toner evenly and
temporarily improve print quality.
This is not intended to be a long-term method of correction, but only to assist your printing needs until you obtain a new
cartridge assembly.
CAUTION: Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching
this area.
1. Open the top cover.
2. Pull the toner cartridge out.
3. Thoroughly shake the cartridge 3-4 times to distribute the toner evenly inside the cartridge.