Dell OptiPlex 745 User Manual

Back to Contents Page
Dell™OptiPlex™745User'sGuide
Removing the Computer Cover



1. Follow the procedures in Before You Begin.

2. Lay the computer on its side as shown in the illustration.

3. Locate the cover release latch shown in the illustration. Then, slide the release latch back as you lift the cover.

4. Grip the sides of the computer cover and pivot the cover up using the hinge tabs as leverage points.

5. Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.
Back to Contents Page

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
CAUTION: Graphic card heatsinks can become very hot during normal operation. Ensure that a graphic card heatsink has had sufficient time to
cool before you touch it.
1
security cable slot
2
cover release latch
3
padlock ring

Dell OptiPlex 745 Specifications

General

Brand	Dell
Model	OptiPlex 745
Category	Desktop
Language	English