Dell P26T User Manual

Option Description
Enclave Memory
Size
This option sets SGX Enclave Reserve Memory Size. The options are:
● 32 MB
● 64 MB
● 128 MB
Performance screen options
Option Description
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature.
● Enable Intel SpeedStep
Default setting: The option is enabled.
C-States Control Allows you to enable or disable the additional processor sleep states.
● C states
Default setting: The option is enabled.
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor.
● Enable Intel TurboBoost
Default setting: The option is enabled.
Power management screen options
Option
Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Default setting: Wake on AC is not selected.
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
● Disabled
● Every Day
● Weekdays
● Select Days
Default setting: Disabled
USB Wake
Support
Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
● Enable USB Wake Support
Default setting: The option is disabled.
Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.
● Disabled (default)
● WLAN Only
Block Sleep This option lets you block entering to sleep in operating system environment.
Default setting: This option is disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After
you enable this option, your system runs only in battery even if the AC is attached.
System setup options 61

Dell P26T Specifications

General

Brand	Dell
Model	P26T
Category	Laptop
Language	English