Dell P91G User Manual

Removing the base cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Loosen the three captive screws that secure the base cover to the palm-rest assembly.
2. Remove the four screws (M2x5) that secure the base cover to the palm-rest assembly.
3. Using a plastic scribe, pry the base cover from the tabs on the hinges and continue to pry the base cover from the slots on
the palm-rest assembly.
CAUTION: Do not pry the base cover from the middle as it might damage the chassis.
4. Carefully remove the base cover off the palm-rest assembly.
6
Removing the base cover 15

Dell P91G Specifications

General

Brand	Dell
Model	P91G
Category	Laptop
Language	English