Replacing the camera
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Connect the camera cable to the camera module.
2. Adhere the tape and turn over the camera module.
3. Using the alignment post, adhere the camera to the display-panel assembly.
41
74 Replacing the camera
To Next Page
Loading...
Need help?
General
