Replacing the display panel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Place the display panel on a clean and flat surface.
2. Replace the display cable.
3. Replace the camera.
4. Identify the left and right SR tape.
5. Remove the release paper from the SR tapes.
39
Replacing the display panel 67
To Next Page
Loading...
Need help?
General
