Dell PowerEdge R650XS RD8NP User Manual

Dell EMC PowerEdge R650xs system
overview
The PowerEdge R650xs system is a 1U server that supports:
● Up to two 3
rd
Generation Intel Xeon Scalable processors with up to 32 cores
● 16 DIMM slots
● Two redundant AC or DC power supply units
● Up to 10 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
● Up to 4 x 3.5-inch SAS/SATA (HDD/SSD) drives
● Up to 8 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at https://www.dell.com/support > Browse all Products > Data Center Infrastructure >
Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals
and Documents.
NOTE: All instances of SAS, SATA drives are referred to as drives in this document, unless specified otherwise.
CAUTION: Do not install GPUs, network cards, or other PCIe devices on your system that are not validated
and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the
system warranty.
NOTE: For more information, see the Dell EMCPowerEdgeR650xs Technical Specifications on the product documentation
page.
Topics:
• Front view of the system
• Rear view of the system
• Inside the system
• Locating the Express Service Code and Service Tag
• System information label
• Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of 4 x 3.5-inch drive system
2
8 Dell EMC PowerEdge R650xs system overview

Dell PowerEdge R650XS RD8NP Specifications

General

Brand	Dell
Model	PowerEdge R650XS RD8NP
Category	Server
Language	English