Dell PowerEdge R650XS RD8NP User Manual

Figure 95. Removing the Serial COM port
3. Tighten the screws and install the PCIe blank on the expansion card riser.
Figure 96. Installing the PCIe blank
Next steps
Replace the serial COM port.
Installing the serial COM port
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Lift the expansion card riser from the connector on the system board.
96
Installing and removing system components

Dell PowerEdge R650XS RD8NP Specifications

General

Brand	Dell
Model	PowerEdge R650XS RD8NP
Category	Server
Language	English