EasyManuals Logo

Dell POWEREDGE R710 User Manual

Dell POWEREDGE R710
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
Installing System Components 151
c
Push the system board toward the back of the chassis until the blue
retention pin locks into place.
6
If applicable, transfer the NIC hardware key.
7
Replace the riser boards. See "Replacing Expansion-Card Riser 1" and
"Replacing Expansion-Card Riser 2."
8
Reinstall the integrated storage controller card. See "Installing the
Integrated Storage Controller Card."
9
If applicable, reconnect the RAID battery cable to the storage controller
card.
10
Reconnect all power and interface cables (see Figure 6-2 for the locations
of the connectors on the system board).
11
If removed, reinstall the SAS backplane and all hard drives. See "System
Board."
12
Install all expansion cards. See "Installing an Expansion Card."
13
If applicable, transfer the iDRAC6 Enterprise card to the new system
board. See "Installing an iDRAC6 Enterprise Card."
14
Replace the fan bracket. See "Replacing the Fan Bracket."
15
Replace the cooling shroud. See "Installing the Cooling Shroud."
16
Close the system. See "Closing the System."
17
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.

Table of Contents

Other manuals for Dell POWEREDGE R710

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell POWEREDGE R710 and is the answer not in the manual?

Dell POWEREDGE R710 Specifications

General IconGeneral
Tcase76 °C
Bus typeQPI
SteppingD0
FSB ParityNo
Processor codeSLBF7
Processor cache8 MB
Processor cores4
Processor modelE5530
System bus rate5.86 GT/s
Processor seriesIntel Xeon 5500 Series
Processor socketSocket B (LGA 1366)
Processor threads8
Processor codenameNehalem EP
Motherboard chipsetIntel® 5520
Number of QPI links2
Processing Die size263 mm²
Processor frequency2.4 GHz
Processor cache typeSmart Cache
Processor lithography45 nm
Processor system typeDP
Processor manufacturerIntel
Processor package size42.5 x 45 mm
Processor front side bus- MHz
Processor boost frequency2.66 GHz
Processor operating modes64-bit
ECC supported by processorYes
Thermal Design Power (TDP)80 W
Number of processors installed1
CPU multiplier (bus/core ratio)18
Memory types supported by processorDDR3-SDRAM
Number of Processing Die Transistors731 M
Memory channels supported by processorTriple
Memory clock speeds supported by processor800, 1066 MHz
Memory bandwidth supported by processor (max)25.6 GB/s
Maximum internal memory supported by processor144 GB
HDD size3.5 \
HDD capacity146 GB
HDD interfaceSerial Attached SCSI (SAS)
Optical drive typeDVD-ROM
Total storage capacity292 GB
Maximum storage capacity6 TB
Internal memory12 GB
Memory clock speed1066 MHz
Memory layout (slots x size)6 x 2 GB
Graphics cardG200
Dimensions (WxDxH)443.1 x 680.7 x 86.4 mm
Non-operating relative humidity (non-condensing)5 - 95 %
PS/2 ports quantity0
USB 2.0 ports quantity5
Power supply570 W
Power requirements90 - 264V
Compatible operating systemsWindows Server, Standart Business Server, Novell SUSE Linux, Red Hat Linux Enterprise
Chassis typeRack (2U)
Storage temperature (T-T)-40 - 65 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Networking featuresGigabit Ethernet
Processor ARK ID37103
Intel® Turbo Boost Technology1.0
Weight and Dimensions IconWeight and Dimensions
Depth680.7 mm
Width443.1 mm
Height86.4 mm
Weight26100 g

Related product manuals