Chapter 11 DeviceNet Master Scanner Module AS01DNET-A
11-27
1
2. Move the DeviceNet slaves from the left list to Scan List of the right side. Follows the steps: Select one
DeviceNet slave node and then click
. Then the DeviceNet slave nodes are moved to the Scan List one
by one.
3. Click OK to finish the configuration above. Then download the configuration data to AS01DNET-A. During
the download, the Warning dialog box will pop out if AS PLC is in RUN mode. Click OK to continue the
download.
To Next Page
Loading...
Need help?
General
