VIVOTEK - Built with Reliability
162 - User's Manual
3-5-24. Settings - Network
Settings - Network - IP
Primary DNS: The primary domain name server that translates hostnames into IP addresses.
Secondary DNS: Secondary domain name server that backups the Primary DNS.
DHCP: Default is selected, the server obtains an available dynamic IP address assigned by the DHCP
server each time the system is connected to the LAN.
Manual setup: Select this option to manually assign a static IP address to the NVR.
Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP.
Subnet mask: This is used to determine if the destination is in the same subnet. The default value is
“255.255.255.0”.
Default router: This is the gateway used to forward frames to destinations in a dierent subnet. Invalid
router setting will fail the transmission to destinations in dierent subnet.
When nished with the network settings, click on the
Apply
button.
The NVR comes with a default gateway and the cameras connected to the PoE ports are assigned
with IPs within a separate network segment. The cameras connected to the PoE ports will be in a
10.1.1.x or 192.168.2.1 segment, automatically provided with subnet addresses.
The NVR’s uplink port will listen to DHCP server by default.
To Next Page
Loading...
Need help?
General
