Delta VIVOTEK ND9442P User Manual

VIVOTEK - Built with Reliability
98 - User's Manual
On the camera Management page, you can congure the following:
1. Recruit or disband cameras.
2. Create a camera name.
3. Binding: Designate how a camera is recognized. The default is MAC
binding. The NVR recognizes a camera by its MAC address regardless of
IP changes. If set to IP binding, static IP setting is preferred. If IP changes
occur, the NVR may not be able to access the cameras.
4. Protocol: You can select ONVIF to recruit cameras made by other
manufacturers.
5. Assign User name and Password, or apply the credentials to all cameras
in your conguration.
6. Change the Network settings.
7. Change the cameras' positions on the layout screen.
3-5-2. Settings–Camera–Management
MAC
The Camera menu provides access to
Management
,
Recording
,
Media
,
Image
,
Motion
detection
, and
PTZ settings
pages.
For camera name, you can enter up to 64 alphabetic and numeric characters including
[0-9][a-z][A-Z][_][-][ ]. For user name and password, you can enter up to 64 alphabetic
and numeric characters including [0-9][a-z][A-Z][!][$][%][-][.][@][''][~].

Delta VIVOTEK ND9442P Specifications

General

Brand	Delta
Model	VIVOTEK ND9442P
Category	Network Hardware
Language	English