106
ENGLISH
Surround
This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater.
Surround modes and parameters
This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode.
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” (vpage79).
Surround mode (vpage45)
Channel output
Surround Parameter (vpage73)
Front
L/R
Center
Surround
L/R
Surround back
L/R
Front height
L/R
Front wide
L/R
Subwoofer
Mode
(vpage73)
Cinema EQ.
z5
(vpage73)
DRC
z9
(vpage73)
D. Comp
z10
(vpage73)
LFE
z11
(vpage73)
Delay Time
(vpage74)
Effect Lev.
(vpage74)
Room Size
(vpage74)
PURE DIRECT
S D
z3
SSS
DIRECT (2channel)
S D
z3
SS
DIRECT (Multi-channel)
SDDD
z1
D
z1
D
z1
D SSS
STEREO
S D SSS
MULTI CH IN
SDDDD
z2
DS S
DOLBY PRO LOGIC gz SDDDDS
z4
SSS
DOLBY PRO LOGIC gx SDDD
DSS
z6
SS
DOLBY PRO LOGIC g SDD DSS
z7
SS
DOLBY PRO LOGIC
SDD DSS
z7
SS
DOLBY PRO LOGIC g A-DSX SDD D
z12
D
z13
DSS
z7
SS
DOLBY PRO LOGIC A-DSX
SDD D
z12
D
z13
DSS
z7
SS
DTS NEO:6
SDDD DSS
z6
SS
DTS NEO:6 A-DSX
SDD D
z12
D
z13
DSS
z6
SS
Audyssey DSX
SDD D
z12
D
z13
D SSS
DOLBY DIGITAL
SDDDD
z2
DS
z8
SS
DOLBY DIGITAL Plus
SDDDD
z2
DS
z8
SS
DOLBY TrueHD
SDDDD
z2
DS
z8
SS
DTS SURROUND
SDDDD
z2
DS
z8
SS
DTS 96/24
SDDDD
z2
DS
z8
SS
DTS-HD
SDDD
D
z2
DS
z8
SS
DTS Express
SDDDD
z2
DS
z8
SS
MULTI CH STEREO
SDDD
z14
D
z15
D
z16
DSS
ROCK ARENA
SDDD
z14
D
z15
D
z16
DSSSS
JAZZ CLUB
SDDD
z14
D
z15
D
z16
DSSSS
MONO MOVIE
SDDD
z14
D
z15
D
z16
DSSSS
VIDEO GAME
SDDD
z14
D
z15
D
z16
DSSSS
MATRIX
SDDD
z14
D
z15
D
z16
D SSS
VIRTUAL
S D
z3
SS
z1 A signal for each channel contained in an input signal is output as audio.
z2 If “Surround Parameter” – “F.Height” (vpage74) is set to “ON”, sound is output from the front height speakers.
z3 Only when “Subwoofer Mode” is set to “LFE+Main” (vpage80), sound is output from the subwoofer.
z4 If this surround mode is selected, only the “Height” mode setting is available for “Surround Parameter” –
“Mode” (vpage73).
z5 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be
set.
z6
This item can be selected when “Surround Parameter” – “Mode” (vpage73) is set to “Cinema”.
z7 This item can be selected when “Surround Parameter” – “Mode” (vpage73) is set to “Cinema” or “Pro Logic”.
z8 This item cannot be set when “Surround Parameter” – “S.Back” (vpage74) is set to “PLgx Music”.
z9 This item can be selected when a Dolby TrueHD signal is played.
z10 This item can be selected when a Dolby Digital or DTS signal is played.
z11 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z12 If “Audyssey DSX” (vpage77) is set to “ON–Height–”, sound is output from the front height speakers.
z13 If “Audyssey DSX” (vpage77) is set to “ON–Wide–”, sound is output from the front wide speakers.
z14 If “Surround Parameter” – “Speaker” – “S.Back” (vpage75) is set to “ON”, sound is output from the surround
back speakers.
z15 If “Surround Parameter” – “Speaker” – “F.Height” (vpage75) is set to “ON”, sound is output from the front
height speakers.
z16 If “Surround Parameter” – “Speaker” – “F.Wide” (vpage75) is set to “ON”, sound is output from the front wide
speakers.