Denon AVR-3311 User Manual

84
ENGLISH
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
Manual Setup
Network Setup Default settings are underlined.
Make network settings.
Setting items Setting details
Network Connecting
Make settings for wired
LAN.
1. Connect the LAN cable (vpage22 “Connecting to a home network
(LAN)”).
2. Turn on this unit (vpage6 “Turn on power”).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the
setting in step 3.
3. Set the IP address at the “Network Connecting”.
0$18$/6(7831(7:25.6(783
1(7:25.&211(&7,1*
0DNHVHWWLQJVIRUZLUHG/$1
5(7851 5HWXUQ
'+&32))
,3$GGUHVV
'HWDLO
([LW
(17(5 (QWHU
0$18$/6(7831(7:2  83
1(7:25.&211(&7,1*
6HW,3DGGUHVVPDQXDOO\
5(7851 5HWXUQ
'+&32))
,3$GGUHVV>@
6XEQHW0DVN>@
'HIDXOWJDWHZD\>@
3ULPDU\'16>@
6HFRQGDU\'16>@
([LW
3UR[\
q
r
e
w
q On the menu, select “Network Connecting” – “Detail” and press
ENTER.
w Use
o p to set “DHCP” to “OFF”, then
press
i.
The DHCP function is disabled.
e Use
uip or 0 – 9 to input the address and
press
ENTER.
• IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.0 – 10.255.255.255
CLASS B: 172.16.0.0 – 172.31.255.255
CLASS C: 192.168.0.0 – 192.168.255.255
• Subnet Mask : When connecting an xDSL modem or terminal
adapter directly to this unit, input the subnet mask indicated in
the documentation supplied by your provider. Normally input
255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its
IP address.
• Primary DNS, Secondary DNS : If there is only one DNS address
indicated in the documentation supplied by your provider, input it at
“Primary DNS”. If there are two or more DNS addresses, input the
first one at “Secondary DNS”.
Setting items Setting details
Network Connecting
(Continued)
r Use
i to select “Exit” and press ENTER.
Setup is complete.
• When connecting to the network via a Proxy server, select “Proxy” and
press
ENTER (vpage84 “Proxy settings”).
• If you are using a broadband router (DHCP function), there is no need
to make the settings at “IP Address” and “Proxy”, since the DHCP
function is set to “ON” in this unit’s default settings.
• If this unit is being used connected to a network without the DHCP
function, the network settings must be made. In this case, some
knowledge of networks is required. For details, consult a network
administrator.
• If you cannot connect to the Internet, recheck the connections and
settings (vpage22).
• If you do not understand about Internet connection, contact your ISP
(Internet Service Provider) or the store from which you purchased your
computer.
• When you want to cancel the setting during IP address input, press
RETURN.
Proxy settings : Make this setting when connecting to the Internet via a
proxy server.
0$18$/6(7831(7:25.6(783
1(7:25.&211(&7,1*
6HW,3DGGUHVVDQGSUR[\PDQXDOO\
5(7851 5HWXUQ
'+&321
,3$GGUHVV
'HWDLO
([LW
(17(5 (QWHU
0$18$/6(7831(7:25.6(783
1(7:25.&211(&7,1*
6HWLIXVLQJSUR[\VHUYHU
5(7851 5HWXUQ
'+&321
,3$GGUHVV>@
6XEQHW0DVN>@
'HIDXOWJDWHZD\>@
3ULPDU\'16>@
6HFRQGDU\'16>@
([LW
3UR[\
(17(5 (QWHU
0$18$/6(7831(7:2  83
1(7:25.&211(&7,1*
3UR[\VHUYHULVXVHG
5(7851 5HWXUQ
3UR[\21
3UR[\$GGUHVV
$GGUHVV>@
3RUW>@
([LW
q
w
u
t
r
y
e
q On the menu, select “Network Connecting” – “Detail” and press
ENTER.
w Use
ui to set “Proxy” and press ENTER.
e Use
o p to set “Proxy” to “ON” and press i.
The proxy server is enabled.

Denon AVR-3311 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/192kHz
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.05 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
Optical drive included	No
Display	LED
Equalizer	Yes
HDMI version	1.4a
Product color	Silver
Audio decoders	DTS 96/24, DTS-ES (Discrete 6.1), DTS-HD, DTS-HD Master Audio, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD
Volume control	Rotary
Multi-Zone quantity	4
Apple docking compatibility	iPod Classic 4, iPod Classic 5, iPod Mini 1, iPod Mini 2, iPod Nano 1, iPod Nano 2
Supported video modes	1080p
HDMI in	6
Audio (L/R) in	9
Composite video in	5
USB ports quantity	1
S-Video inputs quantity	2
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
AM band range	522 - 1611 kHz
FM band range	57.5 - 108 MHz
Composite video out	3
Headphone connectivity	3.5 mm/6.35 mm
Digital audio coaxial out	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	381 mm
Width	434 mm
Height	171 mm
Weight	12200 g