Denon AVR-X3200W Service Manual

SURROUND MODES AND PARAMETERS
Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”.
Sound mode
Channel output
Front
L/R
Center
Surround
L/R
Surround Back
L/R
Front Height
L/R
Top Front
L/R
Top Middle L/R
Front Dolby
Atmos Enabled
L/R
Surround Dolby
Atmos Enabled
L/R
Subwoofer
Direct/Pure Direct (2-channel)
S Dz5
Direct/Pure Direct (Multi-channel)
SDD Dz3 Dz3 Dz3 Dz3 Dz3 Dz3 D
DSD Direct (2-channel)
S Dz5
DSD Direct (Multi-channel)
SDD D
Stereo
S D
Multi Ch In
SDD Dz3 D
Dolby Surround z1 SDD Dz4 DDDDDD
DTS Neural:X z2 SDDDDDDDDD
Dolby Digital
SDD D
Dolby Digital Plus
SDD Dz3 Dz3 D
Dolby TrueHD
SDD Dz3 Dz3 D
Dolby Atmos
SDDDDDDDDD
DTS Surround
SDDD D
DTS 96/24
SDDD D
DTS-HD
SDD Dz3 Dz3 D
DTS Express
SDDD D
DTS:X
SDDDDDDDDD
Multi Ch Stereo
SDDDDDDDDD
Rock Arena
SDDDDDDDDD
Jazz Club
SDDDDDDDDD
Mono Movie
SDDDDDDDDD
Video Game
SDDDDDDDDD
Matrix
SDDDDDDDDD
Virtual
S D
z1
The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.
z2
The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name.
z3
A signal for each channel contained in an input signal is output as audio.
z4 Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”.
z5 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”.
Sound modes and surround parameters
Sound mode
Surround Parameter
Dialog Level
Adjust
Subwoofer
Level Adjust
Cinema EQ
Loudness
Management
z1
Dynamic
Compression
z2
Dialog Control
z3
L
ow
Frequency
z4
Delay Time Room Size
Direct/Pure Direct (2-channel) z5 Sz6 S S
Direct/Pure Direct (Multi-channel) z5 SSSSS
DSD Direct (2-channel)
Sz6
DSD Direct (Multi-channel) z5 S S S
Stereo
SSS
Multi Ch In
SSSS
Dolby Surround
S S S S S
DTS Neural:X
SSSS
Dolby Digital
SSSSSS
Dolby Digital Plus
SSSSSS
Dolby TrueHD
SSSSSS
Dolby Atmos
SSSSSS
DTS Surround
SSSSS
DTS 96/24
SSSS
DTS-HD
SSSS
DTS Express
SSSS
DTS:X
SSSSS
Multi Ch Stereo
SSSSS
Rock Arena
SSSSSSS
Jazz Club
SSSSSSS
Mono Movie
SSSSSSS
Video Game
SSSSSSS
Matrix
SSSSSS
Virtual
SSSSS
z
1 -
z
6 : “Sound modes and surround parameters”
85

Denon AVR-X3200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	8
Audio (L/R) in	5
Composite video in	3
USB ports quantity	1
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	vTuner
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	DTS-HD Master Audio, Dolby Surround, Dolby TrueHD
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	650 W

Weight and Dimensions

Depth	388 mm
Width	434 mm
Height	167 mm
Weight	11300 g