Denon AVR-X3200W Service Manual

Check the connection environment
YES
YES
YES
YES
YES
Are the network settings of this unit correct?
Are peripheral devices such as the router and hub connected
correctly?
Are the router settings correct?
Set the IP address, etc. correctly.
If the IP settings are xed, check that no
other devices have the same IP address and
that the subnet mask settings are correct.
Connect the peripheral devices correctly.
Check the instruction manual of the router
and congure the settings correctly.
Check that there are no connection
restrictions by MAC addresses, etc.
NO
NO
NO
5. Network/Bluetooth/USB
5.1. Cannot connect to the network
Is the LAN cable correctly inserted?
Insert the LAN cable correctly and then turn
on the power again.
NO
Check the connection environment
Checking the unit
YES
YES
Can an output voltage (3.3V) to
IC112(DC-DC Conv.) be conrmed?
Can a voltage (5V) be conrmed between pin 2 and pin 5 of
CN903?
Is D5V_POWER (IC151 uCOM 136pin)
"Hi" ?
The circuit of D5V_POWER between
IC151 and IC112 are faulty.
The circuit around IC112(DC-DC.
Conv.) is faulty.
The circuit between the AC inlet and CN903
is faulty. Check the SMPS PCB.
NO NO
NO
YES
98

Denon AVR-X3200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	8
Audio (L/R) in	5
Composite video in	3
USB ports quantity	1
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	vTuner
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	DTS-HD Master Audio, Dolby Surround, Dolby TrueHD
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	650 W

Weight and Dimensions

Depth	388 mm
Width	434 mm
Height	167 mm
Weight	11300 g