Digi AnywhereUSB 8 Plus User Manual

Configure the AnywhereUSB Plus Hub from the CLI factory-default
AnywhereUSB® Plus User Guide
125
factory-default
Purpose
Restore the AnywhereUSB® Plus Hub to the factory default configuration. The restore process clears
all current settings (including all previously stored client IDs and certificates), deletes all Hub and
AnywhereUSBManager keys, resets the password for the administrative user, and restores the
settings to the factory defaults. After the Hub reboots, you must re-deploy the Hub.
Note You can also restore the Hub to the factory default settings from the web UI and the Reset
button on the Hub. The Reset button has the same action as the factory-default command. However,
if you restore the Hub to the factory defaults from the web UI, you have the option to retain the IP
address configuration option.
Syntax
factory-default

Digi AnywhereUSB 8 Plus Specifications

General

Brand	Digi
Model	AnywhereUSB 8 Plus
Category	Switch
Language	English