Digi ConnectPort LTS Series User Manual

Configure the device using the ConnectPort LTS web interface Administration
Digi ConnectPort LTS User Guide
121
File Management
Use the File Management page to upload custom files to a ConnectPort LTS product, such as an
image file containing your company logo. You can use custom applets and HTML files to alter the
interface either by adding a different company logo, changing colors, or moving information to
different locations.
If you upload an index.htm or index.html file, that file automatically loads when you sign in to a Digi
device from the web browser.
Upload files
To upload files to a device:
1. Select Administration >File Management.
2. Click Choose File to locate and select the file.
3. Click Upload.
Delete files
To delete files from a device:
1. Select Administration >File Management.
2. Select the Action check boxes next to files that you want to delete.
3. Click Delete.
Factory reset does not delete custom files
A factory reset does not delete files uploaded to the File Management page. When you restore the Digi
device to factory defaults or press the Reset button on the device (see Factory default settings), the
uploaded files remain. This allows you to retain custom applets and custom factory defaults. If you
want to remove custom files you must manually delete them (see Delete files). The root user also can
delete custom files by accessing the command-line interface.
Backup/Restore
After you configure a ConnectPort LTS device, back up the configuration settings. You can restore the
backup configuration settings if a problem occurs when updating the firmware or adding hardware. If
you need to configure multiple devices, you can use the backup/restore feature to load the backup
configuration settings from the first device onto the other devices.
Back up or restore a device configuration from the web interface
You can back up or restore a device configuration to a server from the web-interface and download a
configuration from a server to a file
To backup a device configuration:
1. Click Administration > Backup/Restore. The Backup/Restore page appears.
2. Select the storage location type. The ConnectPort LTSbasic version supports NFS/Samba/User
space/Local machine for the location. The default filename for the backup file is backup.cfg.
3. Click Backup.
To restore a device configuration:

Digi ConnectPort LTS Series Specifications

General

Brand	Digi
Model	ConnectPort LTS Series
Category	Server
Language	English