Digi ConnectPort LTS Series User Manual

Configure and manage the device using the ConnectPort LTS
command line interface
Management through the command line
interface
Digi ConnectPort LTS User Guide
133
n set ? displays the syntax and options for the set command. Use this command to determine
whether the device includes a particular set command variant to configure various features.
n help set displays syntax and options for the set command.
n set serial ? displays the syntax and options for the set serial command.
n help set serial displays the syntax and options for the set serial command.
Management through the command line interface
This section provides information on some key commands available from the command line interface.
For more information, see the Digi Connect Family Command Reference on www.digi.com.
Use the following commands to display information and statistics:
n display
n info
n set alarm
n set buffer and display buffer
n set snmp
n show
Use the following commands to manage connections and sessions:
n close
n connect
n exit and quit
n reconnect
n rlogin
n send
n status
n telnet
n who and kill
Use the following commands to configure the ConnectPort LTS product:
n newpass
n set alarm
n set autoconnect
n set buffer and display buffer
n set group
n set host
n set ippool
n set lcd
n set modem
n set network

Digi ConnectPort LTS Series Specifications

General

Brand	Digi
Model	ConnectPort LTS Series
Category	Server
Language	English