Digi ConnectPort LTS Series User Manual

Configure and manage the device using the ConnectPort LTS
command line interface
Management through the command line
interface
Digi ConnectPort LTS User Guide
138
set pmodem
Use the set pmodem command to configure the modem emulation.
set portauth
Use the set portauth command to enable authentication for serial ports.
set ppp
Use the set ppp command to configure PPP connections.
set profiles
Use the set profiles command to configure the port profile for a serial port.
set python
Use the set python command to configure Python.
set realport
Use the set realport command to configure RealPort.
set rtstoggle
Use the set rtstoggle command to configure the RTS toggle.
set samba
Use the set samba command to configure the Samba server.
set sdmemory
Use the set sdmemory command to configure the SD memory.
set serial
Use the set serial command to configure the serial port options.
set service
Use the set service command to configure the network services.
set smtp
Use the set smtp command to configure SMTP.
set snmp
Use the set snmp command to configure SNMP, including SNMP traps, such as:

Digi ConnectPort LTS Series Specifications

General

Brand	Digi
Model	ConnectPort LTS Series
Category	Server
Language	English