Digi ConnectPort LTS Series User Manual

Configure the device using the ConnectPort LTS web interface Administration
Digi ConnectPort LTS User Guide
130
module.
Reboot
Changes to some device settings require saving the changes and rebooting the ConnectPort LTS. Use
the Reboot page to reboot the ConnectPort LTS. To reboot a ConnectPort LTS from the web interface:
1. Select Administration > Reboot.
2. Click the Reboot button. Wait approximately one minute for the reboot to complete.
Enable/disable access to network services
You can enable and disable access to various network services, such as ADDP, RealPort, SNMP, SSH,
and telnet. For example, you can disable access to all network services that are not required for
running or interfacing with the ConnectPort LTS product for performance and security reasons. From
the web interface, you can enable and disable network services on the Network Services Settings
page for a ConnectPort LTS product. See Basic Network Services Settings.

Digi ConnectPort LTS Series Specifications

General

Brand	Digi
Model	ConnectPort LTS Series
Category	Server
Language	English