Digi ConnectPort LTS Series User Manual

Configure and manage the device using the ConnectPort LTS
command line interface
Management through the command line
interface
Digi ConnectPort LTS User Guide
139
n Authentication failure
n Cold start
n Link up
n Login traps
The set snmp command also displays current SNMP settings.
set socket_tunnel
Use the set socket_tunnel command to configure the socket tunnel.
set switches
Use the set switches command to configure the MEI type and termination.
set sysauth
Use the set sysauth command to enable authentication for the web interface and command-line
interface.
set syslog
Use the set syslog command to configure the system log.
set system
Use the set system command to configure the system identifying information.
set tcpserial
Use the set tcpserial command to configure serial TCP.
set trace
Use the set trace command to configure the trace log.
set udpserial
Use the set udpserial command to configure the serial UDP.
set user
Use the set user command to configure a user.
set web
Use the set web command to configure the web timeout value in minutes.
set xbee
Use the set xbee command to configure the XBee.

Digi ConnectPort LTS Series Specifications

General

Brand	Digi
Model	ConnectPort LTS Series
Category	Server
Language	English